x
Search Products & Site    Search Inventory

Bush Hog 2215

Bush Hog 2215 for sale at Evergreen Tractor, Louisiana

Double tap to zoom

Bush Hog 2215 for sale at Evergreen Tractor, Louisiana

 

Features

Performance Features

  • Wing skids are 3/8 inch thick for extended wear and outside edges are turned up at 45 degrees to stop heavy ground contact that might damage the sidebands.
  • Center section blades properly align with center wheels to closely cut out the bottom of ditches.
  • Grease fittings and spring steel bushings at axle pivot points for longer life.
  • Free wing float without movement of the hydraulic cylinder rod is 22 degrees down and 45 degrees up.
  • Optional grass/row crop baffles for improved distribution in grass and corn stalk shredding.

 

Construction Features

  • Center section axle spindles are centered on the axle arm for equalized loading of vertical forces.
  • Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked.
  • All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points, reducing service times.
  • Greaseable Axle Pivot Points with spring steel bushings
  • Turnbuckle alignment with wing hinge pin ensures long life of turnbuckle and less hinge wear.
  • Powder Coat Paint

 

Safety Features

  • Improved design of wing sidebands means less damage caused by sideband-to-ground contact

Specifications

MODELS 2215
CUTTING WIDTH 15'
CUTTING HEIGHT 2″ -14″
CUTTING CAPACITY 3 1/2″
TRANSPORT WIDTH* 8' 2"
TRANSPORT HEIGHT** 7' 3"
TRANSPORT LENGTH*** 15' 3"
APPROXIMATE WEIGHT (LB) 4,700
APPROXIMATE TONGUE WEIGHT (LB.) 1,800
MINIMUM TRACTOR PTO HP 60
HITCH "PERMA-LEVEL"
CENTER DECK 10GA
WING DECKS 10GA
WING CUTTING ANGLES 22° DOWN AND 45° UP
WING LEVEL ADJUSTMENT TURNBUCKLES
SIDEBANDS 1/4″ X 13 1/2″
TRANSFER GEARBOX (HP) 250
CUTTING GEARBOX (HP) 210
INPUT DRIVELINE CATEGORY 6
CUTTING DRIVELINES CATEGORY 4
BLADE HOLDER 7GA ROUND
BLADES 1/2″ X 4″
BLADE TIP SPEED (FPM) 16,286
AXLE SUSPENSION SPRINGS @ EACH AXLE
CENTER & WING HYDRAULICS 3 HOSES STANDARD
SAFETY TOW CHAIN STANDARD
DISTRIBUTION BAFFLES OPTIONAL
PTO DRIVELINE SUPPORT OPTIONAL

*Measured from Wing Skid to Wing Skid when Folded

**Measured at Maximum Transport Height

***Measured from hitch tip to rear of 21″ Laminated Tire