Mi-T-M Two Stage Gasoline - AGW-SH22-20M

Features
Generator Mode: AC current only · Selector switch set to idle down · Switch is set to full throttle
Welder Mode: DC current only · Engine must be running full throttle · Selector switch must be set to full throttle
Features
Compressor Pump: Stainless-steel braided discharge hose · Splash lubricated · Large canister intake filter · Oil level sight indicator
Generator: Brush-type 2 pole 120V/240V alternator · Total harmonic distortion (THD) less than 6% · 100% copper windings
Welder: Amperage selection switch, 170A or 220A maximum
Frame: Powder coated ASME coded receiver tanks · 14-gauge powder coated belt guard
Components: Manual drain valves for proper maintenance · Regulator and two gauges for tank and outlet pressure · 16.5-inch fly wheel
Equipped with 150-PSI maximum rated regulator.
Specifications
Displacement/ Engine | 688cc Honda GX690 OHV w/electric start (battery cables included; battery not included) |
Rated Speed | 3600 RPM |
CFM @ 90 PSI | 30.5 |
CFM @ 175 PSI | 29.0 |
Compressor | Two stage, cast iron |
Alternator Wattage/ Cont. On-Load @175 PSI | 4500 watts |
Tank | 20-gallon receiver tank |
Max. AC Output | 5000 watts |
Rated AC Output | 4500 watts |
Alternator Wattage/ Cont. On-Load @ 90 PSI | 4500 watts |
Frequency/Voltage | 60Hz/120V/240V |
Max. Amps (120V/240V) | 41.5/20.8 |
Cont. Amps (120V/240V) | 37.5/18.8 |
Receptacles | (2) 120V, 20A GFCI duplex - 120V/240V, 20A twist lock |
Duty Cycle (10 min. run time) | 220A @ 40%, 190A @ 60%, 150A @ 100% |
DC Voltage | 50-220A working range |
Fuel Tank | 10-gallon |
Weights & Dimensions | |
Net Weight | 803 lbs. |
Shipping Weight | 870 lbs. |
Length | 47 in. |
Width | 24 in. |
Height | 50 in. |