Mi-T-M Two Stage Gasoline - AGW-SM14-30M
Features
Operation
Generator Mode: AC current only · Selector switch set to idle down · Switch is set to full throttle
Welder Mode: DC current only · Engine must be running full throttle · Selector switch must be set to full throttle
Features
Compressor Pump: Stainless-steel braided discharge hose · Splash lubricated · Large canister intake filter · Oil level sight indicator
Generator: Brush-type 2 pole 120V/240V alternator · Total harmonic distortion (THD) less than 6% · 100% copper windings
Welder: Amperage selection switch, 170A or 220A maximum
Frame: Powder coated ASME coded receiver tanks · 16-gauge powder coated belt guard
Components: Manual drain valves for proper maintenance · Regulator and two gauges for tank and outlet pressure · 16.5-inch fly wheel
Equipped with 150-PSI maximum rated regulator.
Specifications
| Displacement/ Engine | 420cc Mi-T-M OHV with electric start - battery and battery cables not included |
| Rated Speed | 3600 RPM |
| CFM @ 90 PSI | 16.4 |
| CFM @ 175 PSI | 15.7 |
| Compressor | Two stage, cast iron |
| Alternator Wattage/ Cont. On-Load @175 PSI | 2500 watts |
| Tank Size | 30-gallon receiver tank |
| Max. AC Output | 5000 watts |
| Rated AC Output | 4500 watts |
| Alternator Wattage/ Cont. On-Load @ 90 PSI | 3000 watts |
| Frequency/Voltage | 60Hz/120V/240V |
| Max. Amps (120V/240V) | 41.5/20.8 |
| Cont. Amps (120V/240V) | 37.5/18.8 |
| Receptacles | (2) 120V, 20A GFCI duplex, (1) 120V/240V, 20A twist lock |
| Duty Cycle (10 min. run time) | 150A @ 100% |
| DC Voltage | 50-170A working range |
| Fuel Tank | 1.85-gallon |
| Weights & Dimensions | |
| Net Weight | 585 lbs. |
| Shipping Weight | 650 lbs. |
| Length | 46 in. |
| Width | 22in. |
| Height | 47 in. |