Land Pride PR1690

Land Pride PR1690 for sale at Evergreen Tractor, Louisiana

Double tap to zoom

Land Pride PR1690 for sale at Evergreen Tractor, Louisiana



Working width 90"
Tractor Horsepower Range PR1690 = 35 - 75 HP
Cat. 3 drive-lines with slip-clutch on second drive-line Slip-clutch offers protection to the gearbox and entire power train when a tough obstruction is encountered with the roller.
6" x 3" x 1/4" Tube Frames Superior in strength.
3/4" x 1 1/2" Carbide Tipped Studs Carbide tipped studs are very tough, used in the mining industry, this offers a long life to the studs. Studs can be replaced one at a time.
15 Degrees left or right angling By angling either direction, the user has many options on what direction to work his area.
Gauge wheels with sealant Easy to adjust vertically to set working depth. Has tall and wide tires that keep turning in fluffy soil. Sealant helps seal against punctures.
Side plates with storage Side plates can be used to hold dirt to aid in filling low spots. Easily store the side plates on
the Powered Rake so that they are always with the rake when needed.
Material control deflector Material control deflector is used to determine what size of material to let pass through the roller and what size to move out.
#50 Double continuous roller chain Double roller chain can take the fluctuation loads from the roller due to varying ground conditions.
Cast Iron chain guard housing Strong enough to protect chain in harsh conditions.
Drive chain enclosed in oil bath with drain plug Oil keeps the chain and sprockets lubricated to keep abrasion to a minimum. Easy to maintain and change oil level.
Replaceable skid shoes Skid shoes protect larger and vital parts of the unit. As they wear due to soil contact, they can easily be replaced.
Quick Hitch Can be used with Land Pride QH15 Cat. l Quick Hitch. (May need extra drive-line.)


Model Nos. PR1690
Tractor Horsepower Range 35-75
Non-Angled Working Width 90"
Weight 1150
Hitch Cat. I and II
Quick Hitch Fits Land Pride QH15 Cat. l Quick Hitch
Gearbox 540 rpm, Ball Bearings, Cast Iron Housing, Drain Plug
Gearbox Oil Capacity & Lubrication Type SAE 90 Weight Gear Lube - 2.38 pints empty (Add gear lube until it escapes from lower plug hole.) 
Primary Drive-line Cat. 3 Heavy-Duty
Secondary Drive-line Cat. 3 with Slip-Clutch
Material Control Deflector 1/2" X 5" Urethane
Spiked Roller 9 3/8" Diameter with 3/4" X 1 1/2" Carbide Tipped Studs
Roller End Bearings Ball Bearing
Drive Chain #50 Double Roller Chain
Angle Adjustment 15 degrees left or right - Hydraulic or manual
Angle Cylinder 2" X 8"
Side Plates Standard, Removable with Storage Rack
Gauge Wheels / Depth Control 16.5" X 6.5"
Air Tires with Sealant and 3/4" Roller Bearings and Spacer Height Adjustment
Skid Shoes Replaceable
Chain Case Lubrication Shell Gradus S2 V2200 00 flowable grease
Land Pride Part #821-045C (32 oz. bottle)
Add gear lube until it escapes from lower plug hole. Equivalent to 2 1/2 pints.