x

Land Pride RCR2660

Land Pride RCR2660 for sale at Evergreen Tractor, Louisiana

Double tap to zoom

Land Pride RCR2660 for sale at Evergreen Tractor, Louisiana

 

Features

FEATURES BENEFITS
Surpassed rugged industry standards All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
110 HP gearbox A rugged heavy built gearbox capable of handling heavy cutting applications.
Cat. 4 drive-line with 4 plate slip-clutch Excellent gearbox protection with the slip-clutch slipping when encountering obstruction in the blade path. Standard slip-clutch offers convenience over shear-bolts.
Cat. l or ll 3-point hitch Allows use on a wider variety of tractors.
Lower clevis type 3-point hitch Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design.
Heavy 10 gauge deck construction Can withstand more abuse than lighter gauge decks.
1/4" Side panels for overall reinforcement Also protects sides from debris being thrown against them from the blades.
Fully welded deck Robotically welded. Adds additional strength and reduces rust.
Extended front tapered deck Contains and discharges material better.
Round back design Allows for more efficient handling and dispersing of material.
9" Deck Height Allows cutter to handle heavy cutting conditions.
2" to 12" Cutting height Provides for a wide range of cutting conditions.
High cutting capacity Can cut brushy areas with saplings up to 3".
Full length skids with replaceable shoes Full length skids protect side plate structure, replaceable shoes for convenience.
1/2" x 4" Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
3/16" Round stump jumper Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
High blade tip speed 60" =12,384 fpm and 72" = 14,861 fpm
3" Dia. cutting capacity Can aid in clearing brush.
Rugged laminated tail-wheel Can't go flat. Choice of single or dual combination.
Chain or rubber shield option Located on front and rear. Reduces flying debris.
Drive-line Holder Keeps drive-line up out of dirt. Easier hook up of drive-line.

Specifications

Model RCR2660
Machine Weight (with Chain Guards) 1002 lbs.
Hitch Category l or ll
Quick Hitch Compatible with Floating Top Link, Quick Hitch Ready
Cutting Width 60"
Overall Width 67"
Overall Length (Including Tailwheel) 110"
Deck Height 9 1/8" (Bottom of Deck to Bottom of Skid Shoe)
Cutting Height 2" - 12"
Cutting Capacity 3"
Recommended Tractor HP 35-130 maximum
PTO Speed 540 rpm
Gearbox 540 rpm PTO Driven Gearbox
1:1.46 Speed-Up Beveled Gears
Cast Iron Housing
Gearbox Lubrication Capacity & Type 7 pints of 80-90W EP oil
Gear box Input/ Output Shaft Size Input Shaft = 1 3/8" - 6 Spline
Output Shaft = 2" Dia.
Deck Construction All welded construction
Deck Material Thickness 10 Gauge
Side Panel Thickness 1/4"
Skids Replaceable
Stump Jumper Round Pan 3/16" x 24"
Blades (2) 1/2" x 4" x 25" Heat Treated Alloy
Steel Free-Swinging High Lift
Blade Bolt Keyed with harden flat washer and lock nut
Blade Tip Speed 12,384 fpm/788 rpm
Drive-line ASAE Category 4
Drive-line Protection 4 Plate Slip Clutch
Tail-wheel Mount Assembly Welded arm and Caster Fork
Tail-wheel 4.00 x 8 x 15 Laminated Tire
with cast iron hub and tapered roller bearings
Front Guard Optional: Chain Guard
Available through Parts Department: Rubber Guard
Rear Guard Optional: Chain Guard